Description

Edelbrock Performer insug till Buick 400-455.

Edelbrock Part # 2146 Performer Buick 455 intake manifold is designed for street 400-430-455 c.i.d. Buick V8’s. Manifold not equipped with EGR. Will fit cold air induction hoods. Will not fit Buick 350. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

• Effektområde: tomgång till 5500rpm,
• Spread / Square Bore,
• Dual Plane,
• Aluminum, Natural.
• Recommended intake gaskets: for 1967-71, Fel-Pro # MS96005; 1972-76, Fel-Pro # MS96014
• Manifold height: A-3.80″, B-4.75″
• Carb pad height: 4.27″
• Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 650-800cfm
• Port exit dimensions: 1.14″ x 2.26″
• # 2146 accepts divorced choke-type Quadrajet only.
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum,
• Anslutning vatten: 1/2″ NPT,
• Anslutning vakuum: 1/8″ NPT,
• Anslutning PCV-ventil: 25 mm (Använd GMC9776721 eller RPC9760).

Säljes styckvis.